Sika Construction Chemical And Products

Product Details:

Product Description:
SikaTop -122 HS is a pre-batched one component polymer modified repair mortar.

Uses:
Repair of spalling and damaged concrete in buildings, bridges, infrastructure and superstructure works.

Characteristics:

• Easy to use (only to be mixed with water)
• Structural and cosmetic repairs
• Can be applied up to 40 mm thick in vertical layers
• Good adhesion
• Suitable for hand and machine application by dry spray application

Product Details:

Product Description:
SikaTop -77 is an acrylic emulsion which when added to cement
mortar/concrete/grout provides good adhesion, water resistance and improvement of other properties. It is available in form of a milky liquid.

Uses:     
SikaTop -77 is a high quality emulsion that substantially increases the quality of cement mortars/concrete/grout for :

• Rendering and coating
• 
  Jointing
• 
  Repair and adhesive mortar
• 
  Roof finishing
• 
  Bonding of concrete casts
• 
  Tiling
• 
  Waterproof rendering
• 
  Cement injection mix.

Advantages:

• Extremely good adhesion
• 
  Reduced shrinkage
• 
  Greater elasticity
• 
  Excellent oil and water resistance
• 
  Increased abrasion resistance
• 
  Improved chemical resistance

Product Details:

Product Description:
SikaTop  Seal 109 hi is an elastic liquid applied, crack bridging 2 pack acrylic polymer modified cementitious waterproofing coating system.

Uses:

• Used as a seamless, impervious coating on flat roof for both exposed and concealed waterproof coating system.
• Basements, water retaining structures, underground concrete structures, pits basins, sumps etc.

Advantages:

• Crack-bridging
• Elastic
• Good Impermeability against water ingress
• Highly water resistant, arrest salt petre and prevent carbonation
• Extremely good bonding with high abrasion resistance
• Simple application and fast curing
• It has excellent adhesion to concrete, brickwork, corrugated asbestos and asbestos cement.

Product Details:

Product Description:
SikaPlast  4202 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.

Uses:

• A wide range of applications where excellent workability is required
•  Concrete with high water reduction
•  High efficient concrete applications
•  Variable use in different concrete systems with different raw materials

Advantages:

• Strong water reduction, resulting in high density, high strength and reduced
• Permeability
• Less sensitive against variations in aggregates and / or different cement types
• High efficiency even at low dosage rates
• Extended workability in conjunction with subsequent strength development
•  Superior plasticising effect, resulting in improved flow, placing and compaction Characteristics

Product Details:

Product Description:
SikaRep Microcrete-4 is factory designed pourable, non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water and coarse aggregate to be added at site as per requirement.

Uses:

• Columns
• Beams
•  Slabs, etc.
•  It is also recommended for grouting of large gaps.

Advantages:

• A properly designed concrete which can be pumped of poured into restricted
• Placement without any vibration.
• Expansion system compensates for shrinkage settlement in plastic stage.
• Easy to mix and apply, high flow characteristic, rapid strength development,
• Good bond with old concrete
• Contains no added chloride

Product Details:

Product Description:
Sikafloor  -261 is a two part, multi purpose binder based on epoxy resin. Due to it’s low viscosity, highly filled self-smoothing and broadcast systems as well as textured coatings, mortar screeds and seal coats can be produced.
"Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals).

Uses:

• Screeds, coatings and layers for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages and loading ramps etc.
• „ The broadcast system is recommended for multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry.

Advantages:

• Highly fillable
• Good chemical and mechanical resistance
• Easy application
• Economical
• Liquid proof
• Gloss finish
• Slip resistant surface possible

Product Details:

Description:
Sikagrout -214 is a high performance, shrinkage compensating, ready to use grouting mortar. Consisting of

•  A blend of cement & fillers,
•  Properly graded quartz aggregates,
•  And Special additives.

When mixed with water, the product forms a fluidgrey coloured grout (similar to concrete colour).

Uses:

• Anchorage of bolts or iron bars in concrete.
•  Precision grouting for industrial equipments, subject to shocks and vibrations.
• Grouting of railway rails or travelling crane tracks.
•  Grouting for turbines, alternators, compressors, generators, machine tools.
•  Beam keying or bridge springier support construction.
•  Assembly of metal reinforced concrete or prestressed concrete prefabricated elements.

Product Details:

Product Description:
Sika CemCrete when used in combination with cement improves the shortcoming of plain cement. Sika CemCrete acrylic polymer enhances the properties of cement slurry/ mortar/concrete making them excellent choice for use in new construction as well as renovation work.

Uses:
Sika CemCrete is a composite waterproof coating system when used in combination with cement, glass fibre, silica sand, etc.
Suitable for waterproofing of :

• Roof terraces, roof slabs, balconies
• Basements
• Water tanks
• Sunshades
• Sunken toilets
• Swimming pools
• Other wet areas.

Characteristics / Advantages:

• Durable and hard wearing surface on application
• Easy to apply by brush, slurry consistency
• Excellent bonding with most of the substrates.
• Protects against water penetration, salt & carbonation
• Non-corrosive to steel & iron
• Vapour permeable
• Can be used for treatment of leaching and saltpetre action
• Moderate crack bridging properties
• UV ray resistant
• Suitable for contact with potable water when protected with a screed

 

Product Details:

Product Description:
Sika Chapdur is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected Natural mineral aggregates, admixtures and pigments.

Uses:

• Sika Chapdur provides a hard wearing, mineral dry shake topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, wear resistant smooth surface.
• Typical uses are in warehouses, factories, shopping malls, public areas, restaurants and museums.

Advantages:

• Good wear resistance rating
• Impact resistance
• Cost effective surface hardener
• Dust proof
• Easy cleaning
• Increased resistance to oils and grease
• Quality assured factory blending
• Suppresses superficial fibres in concrete

Product Details:

Product Description:
 Sika Injection-101h is a low viscous, fast foaming and solvent-free water-reactive polyurethane injection foam resin, which cures to a dense flexible foam with a fine cellular structure.

Uses:

• Sika Injection-101 h is used for the temporary water stopping of high water intrusions in cracks, joints and cavities in concrete, brickwork and natural stonework.
• To achieve permanent watertight crack sealing, Sika Injection-201 or Sika Injection -203 should be injected subsequently.

Advantages:

• No reaction takes place unless it is in direct contact with water.
• Sika Injection-101h can be injected as a single component system.
• The free foaming expansion in contact with water is up to 40 times.
• The reaction speed (foam formation) is influenced by the temperatures of the
• mixed material, the structure and the contact water, plus the hydrodynamic conditions.

Product Details:

Product Description:
 Sika Injection-202 IN is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible.

Uses:

• Sika Injection-202 IN is used for permanent watertight sealing with some flexibility to absorb limited movement, in dry, damp or water-bearing cracks and joints in concrete, brickwork and natural stone.

• Sika Injection-202 IN can be used for the injection of the Sika Fuko System (non re-injectable!).
• For use in water-bearing cracks under hydrostatic pressure, preliminary injection with shall be made with Sika Injection-101h.

Advantages:

• Permanently elastic, can absorb limited movements.
• No shrinkage in subsequent dry conditions.
• Due to its low viscosity it can penetrates into cracks >0.2 mm in width.
• Cured Sika Injection-202 IN is inert and chemically-resistant.
• Solvent-free, environmentally friendly, usable in ground water protection zones.

Product Details:

First-aid measures:
General instructions in any case show the physician this
thmaterial safety data sheet after inhalation in case of irritation when dust is inhaled, provide for plenty of fresh air. In the event of symptoms take medical treatment.
After skin contact in case of contact with skin wash off immediately with soap and water
consult a doctor if skin irritation persists.
After eye contact in case of contactontact with the eyes, rinse immediately for at least15 minutes with plenty of water. Summon a doctor immediately.
After ingestion do not induce vomiting. Summon a doctor immediately

Product Details:

Description of first aid measures:

• General advice : No hazards which require special first aid measures.
• If inhaled : Move to fresh air.
• In case of skin contact : Take off contaminated clothing and shoes immediately.
• Wash off with soap and plenty of water.
• In case of eye contact : Remove contact lenses. Keep eye wide open while rinsing.
• If swallowed : Do not induce vomiting without medical advice.
• Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.

Product Details:

Product Description:
High range water reducing cum plasticizing concrete admixture for promoting accelerated hardening and obtaining free flowing concrete specially for precast applications.

Uses
SikaPlast 1000 ES is suitable for concreting of the following applications:

• Pre-cast & Pre-stressed concrete elements
• Block Paving (grey/coloured)
• Cement tiles (grey/coloured)
•  Paving flags
•  Kerb stones
•  Edgings and other items for garden and landscape design
•  Building blocks & bricks

Advantages:

SikaPlast 1000 ES offers substantial benefits to the producers of precast and semi dry pre cast concrete producers:

• Efficient dispersion and distribution of cement, additives and pigments
• Improved movement of the concrete through the machine
•  Accelerated hardening & high early strength
•  No adverse effect on ultimate strength
•  Sufficient water reduction
•  Improved surface finish
•  Improved water tightness
•  More economic concrete mix designs

 

Product Details:

Product Description:
A liquid mid-range water-reducing cum water proofing concrete admixture with a powerful plasticizing effect. Also a substantial water reduction can be achieved to promote high ultimate strengths at the high dosage range.

Uses:
Plastiment 2001 NS can be used for high quality concrete in difficult conditions such as: High temperature; long haul; ready mix concrete and wherever high quality dense concrete is required.

Advantages:
Plastiment 2001 NS provides the following beneficial properties :

• Long-lasting control of slump loss
•  Very good for ready mix concrete plants where long haulage is there
•  Improved workability without increasing water
•  Reduced water without loss of workability
•  Improved water tightness/water proofing
•  Increased ultimate strength
•  Improved surface finish
•  Chloride-free
•  Does not attack re-inforcement

Product Details:

Product Description:
SikaPlast 2002 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.

Uses:
SikaPlast 2002 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast 2002 NS is used for the following:

•  A wide range of applications where excellent workability is requested
•  Concrete with high water reduction
•  High efficient concrete applications

Advantages:

• SikaPlast 2002 NS is a powerful superplasticiser based on advanced technology which gives the following advantages:
•  Strong water reduction, resulting in high density, high strength and reduced Permeability
•  Less sensitive against variations in aggregates and / or different cement types
• High efficiency even at low dosage rates Extended workability in conjunction with subsequent strength development
• Superior plasticising effect, resulting in improved flow, placing and compaction Characteristics

Product Details:

Product Description:
SikaPlast 5003 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.

Uses:

• A wide range of applications where excellent workability is requested
•  Concrete with high water reduction
• High efficient concrete applications

Advantages:

• Strong water reduction, resulting in high density, high strength and reduced Permeability.
• Less sensitive against variations in aggregates and / or different cement types
•  High efficiency even at low dosage rates
•  Extended workability in conjunction with subsequent strength development
• Superior plasticising effect, resulting in improved flow, placing and compaction Characteristics

Product Details:

Product Description:
SikaPlast ® 5202 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.

Uses:

• A wide range of applications where excellent workability is requested
• Concrete with high water reduction
• High efficient concrete applications
•  Variable use in different concrete systems with different raw materials

Advantages:

• Strong water reduction, resulting in high density, high strength and reduced
• Permeability
•  Less sensitive against variations in aggregates and / or different cement types
•  High efficiency even at low dosage rates
•  Extended workability in conjunction with subsequent strength development
•  Superior plasticising effect, resulting in improved flow, placing and compaction
•  Characteristics
•  Reduced shrinkage during curing and reduced creep whenhardened
•  Provides many opportunities for cost improvement

Product Details:

Product Description:
 Sika Latex  is a synthetic rubber emulsion for adding to cement mortars where good adhesion and water resistance are required.
The product is suitable for use in tropical and hot climatic conditions.

Uses:

• Thin layer patching mortars
• Renders
• Floor screeds
• Concrete repair mortars
• Abrasion resistant linings
• Tile fixing mortars
• Masonry mortars

Advantages:

• Extremely good adhesion
• Reduced shrinkage
• Greater flexibility
• Excellent water resistance
• Increased abrasion resistance
• Improved chemical resistance
• Non-corrosive
• Ready for use

Product Details:

Product Description:
Sika Raintite I is a multifunctional polymer emulsion for enhancing the properties of mortar/ concrete / grout/ cement slurry providing good adhesion, water resistance and improvement of several other properties.

Uses:
Waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades, etc.

• As a bonding agent for uses in repair and plastering
•  For making polymer mortar for repairs mortars etc.
•  Treatment for leaching and salt petre action
•  Multipurpose mortar admixture for injection grouts
•  Additive to cement based paints for waterproofing

Advantages:

• Improved impermeability against water ingress.
•  Extremely good bonding to moist substrates, extremely improved mechanical, flexural strength and abrasion resistance properties.
• UV resistant & suitable for external coating.

Product Details:

Product Description:
Sikagard -63 is a solvent free, high build thixotropic epoxy resin based protective coating with high chemical resistance.

Uses:

• Abrasion resistant universal coating material designed for normal to highly
• aggressive chemical environments
• For use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika EpoCem ) and steel
• For protective lining of storage tanks, silos and bund areas
• As an anti-corrosion coating in food and beverage processing plants, sewage works, agricultural, chemical and pharmaceutical plants, bottling plants etc.

• Also used as part of glass fibre reinforced self supporting linings with crack bridging properties for bund areas and storage tanks

Product Details:

 “Jai Shree Radhey Shyam Enterprises ” are engaged in Wholesale Trading a wide assortment of Construction Chemical, Chemical Primer, Concrete Admixture, Waterproof Coating, etc.

Product Details:

 “Jai Shree Radhey Shyam Enterprises ” are engaged in Wholesale Trading a wide assortment of Construction Chemical, Chemical Primer, Concrete Admixture, Waterproof Coating, etc.

Product Details:

 “Jai Shree Radhey Shyam Enterprises ” are engaged in Wholesale Trading a wide assortment of Construction Chemical, Chemical Primer, Concrete Admixture, Waterproof Coating, etc.

Product Details:

Product Description:
 A solvent-free, 3 component thixotropic mortar based on a combination of epoxy resins and selected quartz aggregates. After mixing it becomes an easy to use multipurpose repair and adhesive mortar.

Uses:

• As bonding mortar on stone, concrete, mortar, plaster work, etc.
• For vertical and overhead filling of cavities
• For damaged stair-nosings and spalled concrete
•  As abrasion resistant protective layer
•  Suitable for bearing pad for bridges and heavy machinery

Product Details:

Description:
Sikadur-31 is a thixotropic adhesive mortar based on a 2-component solvent free epoxy resin containing fillers. Sikadur-31 will bond and fill a wide variety of building and construction materials and may be used in both dry and damp conditions thereby providing an adhesive mortar ideally suited to site application. It is available in three grades: rapid, normal and long potlife for low, medium and high ambient temperatures respectively.

Uses:
Sikadur-31 may be used as a thin layer levelling mortar, repair mortar or adhesive for most building materials (concrete, brick, stone, ceramics, cement mortar, GRC, fibrous cement, iron and steel and epoxy mortar). Sikadur-31 may also be used to anchor holding down bolts, starter bars etc. as a bonding bridge between old concrete and Sikadur-41 mortar. The material is also ideally suited for bonding of external reinforcement and as a general
structural adhesive. Special higher strength grades of the material are available for segmental bridge and other construction.

Advantages:

• Chemical resistant
• Insensitive to moisture during application, cure or whilst in service
• Applicable at low temperatures
• Excellent adhesion to most building materials even when damp
• High abrasion resistance
• Approved for use in contact with potable water
• High early strength
• High tensile and flexural strength
• Supplied in factory proportioned units
• Easily applied – thixotropic, non-sag
• Proven in service
• Shrink free
• Two components of different colours enabling visual control of degree of mixing.

Product Details:

Product Description:
Sikadur -52 is two part, solvent-free, low viscosity injection-liquid, based on high strength epoxy resin.

Uses:
As an injection resin with good adhesion to dry concrete, mortar, stone, steel and wood.Sikadur -52 is used to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures.

Characteristics / Advantages:

• Solvent-free
• Suitable for dry conditions
• Usable at low temperatures
• Shrinkage free hardening
• High mechanical and adhesive strengths
• Hard but not brittle
• Low viscosity
• Injectable with single component pumps

Product Details:

Description:
Sika Crack Seal® Is A 100% Acrylic Elastomeric Crack Filler Designed For Filling Cracks In Concrete Surfaces. Sika Crack Seal Meets The Following Technical Material Requirements When Tested In Accordance With Astm C661, Astm C719, Astm C793, Astm C794, And Astm D4758.

Uses:

• For Concrete Driveways, Parking Lots, Patios, Side- Walks, Walls, And More.
•  For Mortar Or Stone.
• On Horizontal And Vertical Surfaces.

Characteristics / Advantages:

• Sika Crack Seal Exhibits Outstanding Low Temperature
• Flexibility. Features Include:
• Environmentally Friendly 100% Acrylic Water Based
• Formulation.
• Outstanding Flexibility – Remains Flexible At Temperat-
• Ures Below 0°C.
• High Solids Formula For Less Shrinkage.
•  Chloride Ingress Resistance.
•  Waterproof.
•  Uv Resistance.
• Overpaintable
•  Excellent Adhesion.

Product Details:

Uses:
 White cement based finishing / smoothening material for indoor
and outdoor plastered surfaces
Renders a smooth and durable surface and acts as an underlayer
for all kinds of decorative paints.

Sika Wall Decor Advantages:

•  Excellent white look & smooth finish
•  Excellent water resistant capability
•  Reduces paint consumption
•  Never peels off
•  No flaking
•  No Blistering, No Chalking
•  Good breathability
•  Superb Bonding- White Cement base provides great adhesionto walls
•  Better Coverage
•  Can be applied on moist surface
•  Excellent workability & ease of application
•  Can be stained with a good quality water based Stain for light Shades
•  Pre-tinted form can be used as a decorative coating without
• the use of conventional paint

Product Details:

Product Description:
Sikadur -32 LP is a solvent-free, two component bonding agent, based on selected epoxy resins. Complies with ASTM C 881-78 type II, Grade 2 Class B+C.

Uses:
Sikadur ® -32 LP provides a bond of far greater strength than the tensile strength of the concrete itself. Therefore it is suitable for use as a structural bonding agent for :

• New to existing concrete
•  Mortar
• Steel, Iron

Characteristics:

• Easy to mix and apply
• Solvent free
• Excellent adhesion to most structural materials
• Unaffected by moisture
• Highly effective even on damp surface
• Workable at low temperatures
• High tensile strength
• Longer pot life

 

 

Product Details:

Product Description:
Water based modified bituminous primer which penetrates and activates the substrates.

Uses:
 Used as a primer for the application of torch on and stick on APP, SBS, modified bituminous waterproofing sheet membranes ( Sika - WP Shield & SikaBit T Range).

Characteristics / Advantages:

• Excellent bond with most substrates like concrete, screed mortar.
• Bonds well with old bituminous substrates
• Effective activation of the surface to receive the waterproofing sheet membrane
• Specially Designed for tropical conditions